meteoblue meteogram AIR shows the weather development in the atmosphere, from ground to around 5500 meters elevation (pressure levels 1020 to 500 hPa) simulating the air layerings above the selected location. The weather variables are shown for 3 to 6 days ahead.
You then find the air temperature (colours in the background) and wind speed and direction (wind barbs) at ground and various atmosphere levels (in hPa), including the zero degree (°C) line (blue). An explanation of the wind barbs is shown on the wind page.
The next diagram shows the expected precipitation amount in mm of rain and probability in % (pink curve), with symbols to indicate the precipitation type.
Below you find the clouds diagram, which gives an indication about the cloud coverage (in %) for each atmospheric altitude (hPa).
There is then the wind diagram, showing the wind speed in km/h (blue curve) and direction with wind barbs. Here you also find the sea level pressure ("SLP", thin black curve) in hPa.
Finally, the last diagram shows the radiation fluxes. Have a look at the radiation help page for more explanations.
meteograms AIR are useful for flight planning, paragliding and mountaineering, as well as for making weather forecasts for specific areas. With the help of the weather variables for the individual air layers, the weather conditions in different altitudes can be interpreted.
Here the link to the direct meteogram AIR on our website:
meteoblue meteograms AIR show the weather for the surrounding area, corresponding to a model grid cell. The specific conditions of the selected location (altitude, inclination) are not displayed in the meteogram AIR. The ground level of the selected location may be lower or higher than the altitude shown by a meteogram AIR. The average altitude of the surrounding area is shown by a line in the temperature chart and a brown bar at the bottom of the cloud chart. A conversion of pressure levels to altitude is shown on the position page.
The differences in altitude between the Meteogram AIR and a local (point®) forecast: In point forecast, we consider the real altitude of the location, in the Meteogram AIR we consider the altitude of the grid cell. This may lead to significant difference in altitude in some places. A difference in altitude means a difference in temperature. We correct the temperature on the basis of the layering of air in our forecast model. So there is not a fix correction, but a dynamic correction. Thus, we ensure that the local forecast in lower altitudes is warmer under normal conditions and colder with inversion situations.
Please note that, even if there might be models available with a higher resolution (e.g. NAM12 for North America),
the Meteogram AIR might show model data with a lower resolution anyway (e.g. NEMS30 in this case).
The reason is that the former model, while having a higher resolution, doesn't provide data for all variables and layers that are required for the Meteogram Air.
For a local precision forecast, please consult the point meteogram.