What is precipitation?

Precipitation is defined as a liquid or solid product of condensed water vapor that falls from clouds or is deposited from the air onto the ground. This includes rain, snow, hail, dew, etc. The total quantity and intensity are measured, which are given in the following units:

Total quantity:

  • mm (mm) water column


  • Millimeters per hour (mm / h)

How is precipitation measured?

The amount of precipitation is always measured in a collecting tank, called Pluviometer. This can either be an automatic device and send measured values as a digital signal or the measurement is performed manually, which means that a human has to read the quantity. There are two different main types of pluviometers that measure either water volume or weight.

Depending on the type of device, a measurement interval may be a few seconds to several days. This has a huge impact on accuracy.

The precipitation intensity can be directly output by automated measuring instruments. It is usually measured at intervals of 10 seconds and averaged over a minute. Such modern gauges are able to map the strong variability of precipitation.

How should a pluviometer be set up?

Pluviometers have no clear WMO standard (World Meteorological Organization). However, in most countries the meters are installed between 0.5 and 1.5m above the ground. In addition, the instruments must be processed in such a way that as little water as possible can splash out, adhere to the edges or splash from the ground into the device. In addition, it is advisable to avoid any obstacles in the environment, as these intercept precipitation on the one hand and on the other cause turbulence in the air, which also affects the precipitation. This also applies to stations with multiple measuring devices. These catch some of the precipitation and throw a kind of "shadow" on the pluviometer. It is therefore advisable to install the pluviometers away from the other measuring devices. For very exposed places there are pluviometers with wind shields to minimize the turbulence caused by the device itself.

Figure 1: Pluviometer with a tipping mechanism

Which measuring instruments are used?

National weather services such as MeteoSwiss usually use one of two different devices to measure precipitation:

  • A pluviometer with tilting system and heating for snowmelt like the device Lambrecht 15188 (Figure 1)
  • A pluviometer based on the weighing principle, which is also heated depending on the climatic conditions, for example the Ott Pluvio2 (Figure 2)

The instruments that determine the precipitation by weighing are more accurate than the tilting devices, but require a greater maintenance effort and are therefore not suitable for remote locations.

Which other measuring methods are available?

The easiest way to measure precipitation is to put a measuring tank with a scale into the open air and manually read the amount after the precipitation event. However, such a method is very error-prone and requires a high level of personnel.

Figure 2: Pluviometer with a weighing sensor

In meteorology, the variants presented above are most commonly used. Measuring instruments with tilting system have a collecting container which tilts when water reaches a certain level and thus empties itself. Each tilting movement triggers a signal that is detected by a computer that calculates the intensity and the total amount.

Another method of measurement is to weigh the precipitation, which allows a very accurate calculation of the amount. In addition, this method can be used to create a continuous high-resolution time series that represent both the amount and intensity of the precipitation. The only disadvantage of these sensors is that the collecting container - at least for older models - must be emptied by hand.

In addition, there are laser-optical distrometers, which use laser beams to measure the size and velocity of each drop / snowflake, thereby calculating rainfall, intensity and the resulting visibility. However, these devices are in terms of accuracy - especially in intensity - the previous models behind.

Difficulties of precipitation measurement

In contrast to temperature, the spatial variability of precipitation is significantly higher. While the temperature between two weather stations in flat terrain behaves almost linearly and can therefore be well interpolated, this is very difficult for precipitation, since precipitation events, in particular thunderstorms, can occur very small-scale.

In addition, precipitation measurements are very error-prone. A large part of the errors is location-dependent, because even small obstacles, such as a tree or a power line, can influence the measurement result by absorbing part of the precipitation. Strong winds even amplify this influence, because even obstacles at greater distances can influence precipitation caused by air turbulence.

In addition, splashes from other objects in the vicinity of a pluviometer can get into the collection container and thus falsify the measurement.

Another problem is the contamination of the container by other objects. Especially in autumn, many leaves are transported through the air and can settle in the opening of the pluviometer. Also other objects such as branches, dust or sand can accumulate and so pollute the measuring container.

In places with snowfall, the meters must be heated so that the snow can neither fill nor cover the container, but melts and can be measured as a liquid precipitate. It is important that the heating is constant, as the volume of water is temperature dependent.

Another source of error is the evaporation of water by solar radiation. Therefore, the equipment should consist of a funnel, which leads the water into the measuring tank underneath. The narrow funnel opening minimizes errors due to evaporation losses.

How many measuring stations are there?

MeteoSwiss operates 260 automatic weather stations that measure precipitation. These are supplemented by a network of about 300 private stations, since precipitation is a very local phenomenon.

Figure 3: Global network of precipitation measurement

The Global Precipitation Climatology Center (GPCC), which is operated by the DWD (German Weather Service) on behalf of the WMO, collects quality-controlled data from sometimes more than 50,000 precipitation measuring stations worldwide. The time series of these measurements often have very large gaps and are error-prone despite quality control, which is why an automated use of this data is not suggested and a renewed quality inspection is recommended for validations.